Table of Contents
Advertisement
Section 4 - Configuration
VDSL is one of the latest and fastest home broadband technologies. VDSL uses the DSL port
on your DVA-2800 to connect to the Internet. In order for your DVA-2800 to use VDSL, you
must configure the VDSL Settings, your ISP Settings, and your IPv4/IPv6 Settings.
WAN Access Type:
Select VDSL to configure ADSL connection settings.
Interface:
Select the interface from the drop-down menu. PTM0-PTM7 are
available. The default is PTM0.
Enable Interface:
Select whether to enable or disable this interface.
ISP Settings
VLAN Tagged:
Enable or disable VLAN tagging.
If you enabled VLAN Tagged, the following options are available:
VLAN ID:
Enter the VLAN ID. The value should be 0, or 0-4079.
VLAN Priority:
Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
Service Type:
Select a service type from the list. Choose from INTERNET, VOIP,
INTERNET_VOIP, TR069, TR069_INTERNET, or INTERNET_VOIP_
TR069. This information should be provided by your ISP. If you are
configuring your connection manually and your ISP has not specified
this setting, selecting INTERNET is recommended.
Proceed to IPv4 Settings on page 33 or IPv6 Settings on page 38.
D-Link DVA-2800 User Manual
VDSL
30
- Quick Links:
- Manual Setup
- Setup Wizard
- Configuration
- Internet
Hide quick links:
Advertisement
Table of Contents
