Table of Contents
Advertisement
Section 4 - Configuration
ADSL is one of the first home broadband technologies introduced. ADSL uses the DSL port
on your DVA-2800 to connect to the Internet. In order for your DVA-2800 to use ADSL, you
must configure the ADSL Settings, your ISP Settings, and your IPv4/IPv6 Settings.
WAN Access Type:
Select ADSL to configure ADSL connection settings.
Interface:
Select the interface from the drop-down menu. ATM0-ATM7 are
available. The default is ATM0.
Enable Interface:
Select whether to enable or disable this interface.
ISP Settings
VPI:
Enter the Virtual Path Indicator (0 - 255).
VCI:
Enter the Virtual Channel Indicator (32 - 65535).
VLAN Tagged:
Enable or disable VLAN tagging.
If you enabled VLAN Tagged, the following options are available:
VLAN ID:
Enter the VLAN ID. The value should be 0, or 0-4079.
VLAN Priority:
Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
Service Type:
Select a service type from the list. Choose from INTERNET, VOIP,
INTERNET_VOIP, TR069, TR069_INTERNET, or INTERNET_VOIP_
TR069. This information should be provided by your ISP. If you are
configuring your connection manually and your ISP has not specified
this setting, selecting INTERNET is recommended.
D-Link DVA-2800 User Manual
ADSL
28
- Quick Links:
- Manual Setup
- Setup Wizard
- Configuration
- Internet
Hide quick links:
Advertisement
Table of Contents
