Table of Contents
Advertisement
11.05
02.12
05.01
Table 7-16
Assigning the basic line filters to the I/R modules
Filter
Line filter
components
16 kW
Rated AC current
36 A
Supply voltage
3–ph. 380 V AC – 10% ... 3 –ph. 480 V + 10%/–15% < 1 min) (TN line supply)
Hz
Order number
6SL3000–
0BE21–6DAV
Mounting position
Wall or base/floor mounting, refer to Fig. 7-14
Dimensions (W x H x D),
50x429x226
approx.
Module width
Refer to dimension drawings, Chapter 12
Weight, filter
5 kg
Power loss
16 W
Connection
10 mm
/1.5 Nm
PE, M6 studs
/3 Nm
Terminals
L1, L2, L3, PE
Line supply connection
(line)
Terminals
L1', L2', L3', PE
Load connection (load)
4)
I
fuse
35 A
rated
Compatibility , residual cur-
The discharge current is limited to approx. 110 mA in conjunction with a universally cur-
rent protective devices
rent sensitive residual current protective device and Siemens cables and the 150 m cable.
Permissible
ambient temperature
S
Operation
[°C]
S
–25 ... +70
Storage/transport [°C]
Cooler
Natural ventilation
Degree of protection to EN
IP20
60529 (IEC 60529)
DIN EN 61800-3 (IEC
Limit value Class C 2
61800-3)/VDE 0160-103 ra-
dio interference suppres-
sion
1) The permissible supply voltage of the system depends on the infeed module used.
2) For ring terminal end in accordance with DIN 46234
3) Being prepared
4) The fuse used must have this rated current. Recommendations for the fuses, refer to Table 7-6.
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
I/RF module
16/21 kW
Line filter
36 kW
65 A
6SL3000–
0BE23–6DAV
75x433x226
6.5 kg
28 W
2
35 mm
PE, M6 studs
/3 Nm
2)
L1, L2, L3, PE
L1', L2', L3', PE
80 A
0 ... +40; maximum +55 at 0.6 • P
7 Line Supply Connection
7.4 Line filters for I/R and UI modules
I/RF module
36/47 kW
Line filter
55 kW
105 A
6SL3000–
0BE25–5DAV
100x466x226
11.5 kg
41 W
2
50 mm
PE, M6 studs
2)
2)
/3 Nm
L1, L2, L3, PE
L1', L2', L3', PE
125 A
of the l/R module
rated
I/RF module
55/71 kW
1)
; 47 ... 63
2
7-237
7
Hide quick links:
Advertisement
Table of Contents
