Toro 31598 Operator's Manual page 14
Hide thumbs
Also See for 31598:
- Operator's manual (84 pages) ,
- Quick start manual (3 pages) ,
- Operator's manual (68 pages)
Table of Contents
Advertisement
1. Read the Operator's Manual for information on maintenance.
125–5263
1. Read the Operator's Manual for information on fuses.
130–2449
1. Read the Operators Manual; to start the engine, move the
traction pedal to Neutral, apply the brake, move the throttle
switch to low, turn the ignition key to Preheat. When the
Wait to Start Advisory clears on the Info Center then turn
the ignition key to Start.
2. Read the Operators Manual; to stop the engine, move the
throttle lever to slow, disengage the PTO, set the parking
brake, wait 5 minutes, turn the ignition key to Stop, and
remove the key; read the Operators Manual.
3. Read the Operators Manual.
4. To engage the PTO, pull up on the PTO switch.
5. To disengage the PTO, push down on the PTO switch.
6. To switch the transmission to high speed, fully raise the
attachments and switch the speed control to High.
14
114-0846
Advertisement
Table of Contents
