1.
Status LED
Indicates the status of the remote controller.
LED color
LED indication
None
Off
Green
Lit up
Blue
Lit up
Purple
Lit up
Blinking slowly at an
Green
interval of 6
seconds
Red
Blinking
Yellow
Blinking
Cyan
Lit up
Blinking twice
Cyan
repeatedly
Green,
red, and
Blinking alternately
yellow
2.
(Automated flight pause) button
Press to pause the aircraft's movement during automated flight.
3.
(Power) button
Operation
Press and hold for 2 seconds
Status of the remote controller
Turned off
Not connected to the aircraft
Connected to the aircraft as the main controller
Connected to the aircraft as the sub controller
In a standby state
An error has occurred in the remote controller.
There has been no operation for more than 5 minutes. The remote controller
will enter a standby state if you leave it without performing any operation.
In the system software transfer mode
Waiting for the completion of linking with the aircraft.
Updating system software
Result
The remote controller turns on.
21