General Information; Installing External Devices - Sony Airpeak S1 Help Manual
Hide thumbs
Also See for Airpeak S1:
- Specifications (2 pages) ,
- Integration manual (12 pages) ,
- Startup manual (56 pages)
Table of Contents
Advertisement
Help Guide
Airpeak S1
ARS-S1
General Information
Aircraft/Gimbal
Using the product
Comply with all applicable laws, regulations and ordinances, including the Federal Aviation Administration's
regulations in 14 C.F.R. Part 107, while using the aircraft and remote controller.
For safety, do not change or modify aircraft components. When installing external devices, be aware of the aircraft
weight after installation. Do not install external devices that exceed the maximum payload. As external devices, use
only genuine Sony devices or devices recommended by Sony, and install in the correct position as described in the
instruction manual. Devices that shift the aircraft center of gravity pose a risk of crashes.
Included AC power cord
Use only the included or Sony recommended AC power cord.
AC adapters
Use only the included or Sony recommended AC adapters.
Carrying components
When carrying the aircraft, hold it securely by the frame arms. If you do not hold it securely by the frame arms, you
may drop and damage the aircraft or hurt yourself.
When carrying the remote controller, hold it by the handle bar. Do not apply excessive force to the handle bar, control
sticks, or mobile device holder, which may damage these parts.
Be careful not to drop the aircraft or remote controller when carrying these components. Drops may cause damage
or injury.
Installing external devices
The aircraft USB port can supply up to 500 mA of current. If overcurrent conditions exceeding 500 mA occur while an
external device is installed, it may affect flight performance.
Maintenance and storage
The recommended ambient temperature range for storage is 18 °C (64 °F) to 30 °C (86 °F).
Thoroughly wipe off any water that has adhered to the aircraft before storing it.
Do not use the product if you notice any damage or deterioration to the propellers or propeller attachment points of
the aircraft.
Gently wipe off any dirt or dust on the aircraft, remote controller, battery charger, or battery packs with a soft, dry
cloth.
Do not use volatile substances such as alcohol or paint thinner as they may damage the parts and cause
deterioration.
This product contains consumable/wear parts such as rubber parts, motors, etc.
To use the product safely, regular inspections are required in addition to the preflight checks mentioned in this Help
Guide.
It is recommended that you perform regular inspections after 250 flights or 50 hours of total flight, although it
depends on the usage conditions and environment.
Items subject to regular inspection include the following: movement of the moving parts such as motors, condition of
the consumable/wear parts, damage or deformation in each part of the cabinet, and basic functions such as the
sensors and communication function.
For detailed information, contact the place of purchase or Sony Customer Support.
Remote Controller
119
- Quick Links:
- System Configuration
Hide quick links:
Advertisement
Table of Contents
