Operation
8
Operations under access level 1
8.4 Operations under access level 1
8.4.1 Viewing system status
72 | 151
Functions in the sub-chapters are available without a password.
The fire detection system evaluates received signals and indicates them as events.
There are the following event categories:
●
Alarm
●
Fault
●
Technical
●
Isolation
●
Test
●
Information
The 'System status' function is used to display all pending events.
1. Press
on the keypad.
The 'System status' window is open.
2. Select 'System status' and press
The 'System status' window is open. All event types are listed with numbers
of pending events.
3. Select one event type and press
All pending events of the selected type are indicated. You can check each of
the events by pressing
The picture below shows the details of an event as an example.
4/4 Faults
Short
Monitored output
Output card 4M
Circuit 02
03-01-2015 18:08:08
.
.
/
.
L1
A6V10421795_en--_k