7.3. Connector (SCSI and Power Hybrid type)
Figurer 14 shows the external appearance of the Power Supply Connector.
Use IRISO ELECTRONICS P/N9047B-54Z12-GT or equivalent.
PIN #1: +5 V
PIN #2: GND
PIN #3: GND
PIN #4: +12 V
8.Audio (Test condition:Ordinary temperature)
----- Specification for Red Book Disc -----
Output
Sampling Frequency
Quautization
8.1. Line Output --- in case of attenuator is set at 0 dB by the command ---
(1) Output Level
(2) Type
(3) Load Impedance
(4) Frequency Response
(5) Distortion
(6) Signal to Noise Ratio
8.1.1.Connector
Figure 15 shows, the external appearance of the 3P Audio Connector
(Connector, Part No. 008283031100000, made by KYOCERA ELCO Corporation is used.
Use matching housing, Part No. 608283303815000, made by KYOCERA ELCO Corporation
or equivalent.)
PIN #1: GND
PIN #2: R
PIN #3: L
#1
#2
Figure 14 Power Supply Connector
: 2 channel (Analog Audio)
: 44.1 kHz
: 16 bit linear
0.75 V (rms Typ)
Unbalanced
47 kOHM min
20 Hz to 20 kH +/-3 dB
0.014 % Typ (at 1 kHz with 20 kHz LPF)
83 dB Typ (IEC 179 A-weighted)
GND
R
#1
#2
Figure 15 Audio Connector
19/27
#3
#4
L
#3
XM-6401B Rev.1.0