Download Print this page

Programming For Displaying D/A Conversions Which Is Set By Digital Switch - LG MASTER-K200S Series User Manual

Programmable logic controller

Hide thumbs Also See for MASTER-K200S Series:

Table of Contents

Chapter 5. GM PROGRAMMING

5.2 Programming for Displaying D/A Conversions which is Set by Digital Switch

1) System Configuration

GM4 –

PA1A

CPUA

BCD digital switch

(%I0.0.0~%I0.0.15)

2) Initial Settings

(1) Enabled channel : channel 0, 1

3) Descriptions of the Program

(1) % I0.1.0 turning On leads to write the digital value to D/A conversion module.

(2) %I0.1.1 turni n g On leads to output of the values by digital switch on channel 0 of D/A module.

(3) %I0.1.2 turning On leads to output on channel 1.

(4) % I0.1.3 turning On leads to initialization of digital input value to "0" on channel 0 and channel 1.

G4I –

G4F –

D22A

DA3I

Initial Setting of the D/A Conversion module

(%I0.1.0)

Input the digital value of channel 0

(%I0.1.1)

Input the digital value of channel 1

(%I0.1.2)

Input the digital value "0" of channel 0 and 1

(%I0.1.3)

5 - 4

Table of Contents

Show Quick Links

Table of Contents