Additional settings
Configuring the
interface
Ethernet
82
The interface must only be configured by suitably qualified and
competent persons.
Open the menu as follows:
Button
Additional settings
Interface
Interface
Ethernet
-
Configuration of an Ethernet interface.
RS232
-
Configuration of a serial RS232 interface
Select the type of interface and confirm your selection with OK.
The parameters for the interface must be configured next.
-
Module status
Connection status displayed (
Address status
-
List of interface parameters, e.g. IP address, Subnet mask etc.
DHCP
-
The Ethernet interface can either be implemented via a Dynamic
Host Configuration Protocol (DHCP) or by setting the following
parameters:
IP address
–
–
Subnet mask
–
Standard gateway
–
DNS Server automatic
DNS Server 1
–
DNS Server 2
–
Port type
–
Port
–
Ethernet
RS232
Active
Inactive
/
)