Program Sequence Indicator; End Of Program - Miele PG 8581 Operating Instructions Manual
Washer-disinfector
Hide thumbs
Also See for PG 8581:
- Operating instructions manual (144 pages) ,
- Supplementary document (40 pages) ,
- Operating instructions manual (144 pages)
Table of Contents
Advertisement
Operation
Top line
Middle line
Bottom line
Top line
Middle line
Bottom line
56
Program sequence indicator
After the program has started, the program sequence can be followed
in the three-line display.
Vario TD
Main wash 1
Time left
- Program name.
The following parameters can be checked using the arrow buttons
and :
- Current program block, e.g.
- Actual or required temperature
(depending on the display set, see "Further settings/Display:
Temperature"),
- A
value,
0
- Cycle number,
- Time left (in hours; under an hour, in minutes)
End of program
A program is usually finished when the following parameters and
messages are shown in the display:
- Program name.
Continuously alternating between:
- Parameter met/not met,
- A
value
0
- Cycle number,
- Program finished.
In addition, the LED in the Start/Stop buttons goes out and the LED in
the button begins to flash. In the factory default state, an acoustic
tone also sounds for approx. 10 seconds (see "Settings/Volume").
45
Min
Main wash 1
,
Advertisement
Table of Contents
