Connecting The Hp 81200 System To Lan; Receiving Administrator Privileges - HP 81200 Installation Manual

Hide thumbs Also See for 81200:
Table of Contents

Advertisement

Connecting the HP 81200 System to LAN

The HP 81200 System has an Ethernet Interface card installed.
NOTE:
Connecting the HP 81200 System to LAN can only be done with administrator privileges.

Receiving Administrator Privileges

The HP 81200 System has the Windows NT auto-logon and auto-start feature set. So, whenever the
HP 81200 System is switched on it automatically logs on as user "DVT" and starts automatically the
user software of the HP 81200 System.
To logon as a different user, especially as Administrator, the following steps have to be performed.
1. Close the HP 81200 System's user software.
2. Click the Start button, point to Shut Down, and select the Close all programs and log on as a
different user in the Shut Down Window.
3. Now hold down the Shift key and keep it pressed until the new logon dialog box appears.
4. Click on the Yes button in the Shut Down Window.
5. When the new logon dialog box is displayed you can release the Shift key again.
6. In the new logon dialog box type in Administrator as the User name. Enter as Password DVTADM.
The password is case sensitive, so type it in as shown.
NOTE:
When you switch on the HP 81200 System the next time you will get an error dialog, stating that the
password was not typed correctly. This is due to the Windows NT feature to logon as the last known
user, e.g. "Administrator". As the auto-logon is set, also, the password for the "DVT" user is used,
as this is not the correct password for the "Administrator" an error dialog is displayed.
across this error state, you only have to close the error dialog and enter the user "DVT" and the
password "DVT" in the logon dialog box, then click the OK button.
NOTE:
All passwords used in this chapter are the factory set default passwords. It is recommended to change
these passwords. If the passwords are changed, it is important to remember them as they have to be
used for future support tasks or software updates.
Connecting the HP 81200 System to LAN
To come
69

Advertisement

Table of Contents
loading

Table of Contents