Table of Contents
Advertisement
B. Connecting a monitor, keyboard and mouse to the system
If you have not ordered a display and entry panel (option #001), the following devices are required
• Super VGA monitor
• Keyboard with PS2 connector.
• Mouse with PS2 connector.
NOTE:
Monitor, Keyboard and Mouse are not supplied as part of the HP 81200 Data Generator and
Analyzer System.
Figure 13
Monitor, keyboard and mouse to connect to a standard HP E4849A/B mainframe
Apply AC Line Voltage to the HP 81200 System
1. Check that the mainframe is set to the appropriate voltage range, required in your country. The
voltage range selector is located at the rear panel. Usually the mainframes leave the factory
prepared for the correct voltage range for the country of destination.
2. Connect all mainframes and all peripherals which require line voltage to the ac line voltage.
Connect the power cord delivered to the line in connector at the rear panel of the mainframe.
Connect the other end of the power cord to an AC Line Voltage outlet which provides the required
power.
Next Step
After making all the required connections the system can be started, go to
page 45
Setting up an HP 81200 System based on HP E4849A/B Mainframe
Setting up a proprietary System
Mouse
Keyboard
Monitor
"Start the System" on
25
Advertisement
Table of Contents
