Identifi Cation Of The Product; Transportation And Storage; Transporting The Product; Storing The Product - Bosch Rexroth HD 2/H Assembly Instructions Manual

Lift-rotate unit
Table of Contents

Advertisement

16/56

Transportation and storage

A:
Part number
Order number
B:
Designation
C:
Design and dimensions
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
5.3 Identifi cation of the product
. . .
. . . . . . . .
Fig. 5: Name plate
6 Transportation and storage
• Pay attention to the transport instructions on the packaging.
• Shipping weight: see delivery documents.
• The product must always be prevented from tipping over!
• The ambient conditions must be controlled when storing and transporting;
see page 54.

6.1 Transporting the product

Raised loads can fall down!
Serious injury (or death) can occur if the product falls down.
Use only slings with suffi ciently high load capacity (for product weight see
shipping documents).
Check if the carrying straps are attached properly before lifting the product!
The product must always be prevented from tipping over when lifting!
During raising and lowering pay attention that nobody other than the operator is
in the danger zone!

6.2 Storing the product

• Only set the product down onto a level surface.
• Protect the product from mechanical infl uences.
• Protect the product from environmental infl uences such as dirt and moisture.
• Pay attention to the ambient conditions, see page 54.
• Support the product so that hanging-mounted engines/actuators/cylinders will not
be burdened.
A
. . . . . . .
. . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . .
C
WARNING
B
Typschild

Advertisement

Table of Contents
loading

This manual is also suitable for:

3 842 998 7603 842 998 7613 842 998 762

Table of Contents