Table of Contents
Advertisement
Using the BLE/NFC feature (Optional)
Scanning
1
Check that Bluetooth, NFC and Wi-Fi Direct enabled features are on your
mobile device and Wi-Fi Direct feature is enabled on your printer.
2
Open Samsung Mobile Print app.
If you do not have Samsung Mobile Print installed on your cellphone, go
to the application store (Samsung Apps, Play Store, App Store) on your
mobile device, and just search for download the app and try again.
3
Select scan mode.
4
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 47).
If necessary, change the scan option by pressing the
5
Tag your mobile device (usually located on the back of the mobile
device) over the NFC tag (
Wait few seconds for the mobile device to send a job to the printer.
.
For some mobile devices, NFC tag might not be located at the back of the
mobile device. Check the location of the NFC antenna on your mobile
device before tagging.
6
The printer starts scanning the content.
The scanned data is saved on your mobile device.
) on your printer.
3. Network Setup
371
Advertisement
Chapters
Table of Contents
