WEB USER INTERFACE (WEBUI)
_______________________________________________________________________________________________________________
Figure 4-24 shows the configurable parameters options for Serial Ports 1-3. Note that many of the protocols are
not functional at this time and have been reserved for future applications. The primary protocol for the PTC
Console is Genisys GEO used with the serial link to the GEO System with a CPU1.
Serial Ports One through Three Protocol and Path Configuration
•
There are 15 Protocols listed for serial ports 1 through 3, however, Genisys GEO is the only protocol currently
supported. In addition, there are six Path Types choices while configuring the port, but Field is the only
supported one in use with Genisys GEO.
Console Configuration - Ethernet Ports
•
SIG-00-13-12
Version No.: B
Figure 4-24 Serial Port Configuration Options
Figure 4-25 Serial Port Protocol Configuration
4-16
February 2021