Recycling And Disposal - Siemens SINUMERIK 840D sl Equipment Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Application planning
4.3 Recycling and disposal
Ambient conditions
Mechanically active environmental conditions
Classification of the mechanical
environment
Vibratory load
Shock load with shock-sensitive components
Pollution degree
EMC conducted / radiation
Note
The user must consider radio interference for the complete system. Particular attention should
be paid to cabling. Please contact your sales representative for assistance and support.
If compliance with limit value class C2 is required, please contact your local Siemens sales
partner.
4.3
Recycling and disposal
For environmentally friendly recycling and disposal of your old device, please contact a company
certified for the disposal of electrical and electronic waste and dispose of the device in
accordance with the regulations in your country.
38
Application areas
Remarks
Class 3S1 according to EN 60721‑3‑3:
Conductive dust not permitted.
3M3 for components on the machine
3M1 / 3M2 for components in the control cabinet
Frequency range: 10 – 200 Hz
Deflection at 10 – 58 Hz: 0.075 mm
Acceleration at 58 – 200 Hz: 1 g
Acceleration: 5 g
Shock duration: 30 ms
Load: 3 x in each direction
2
Class C2 according to EN 61800-3
Equipment Manual, 10/2020, 6FC5397-1EP40-6BA1
NCU 7x0.3B PN
Advertisement
Table of Contents
