Table of Contents
Advertisement
Available languages
Available languages
en
110 | ACS 651/751 | Program description
6.13.2
Executing recovery when the engine and the
A/C system are OK
i
After executing step 19 of chapter 6.13.1, the follow-
ing screen is displayed.
1. Follow the instructions on the screen and press E.
The following screen is displayed.
2. Follow the instruction on the screen and press E.
The recovery phase is initiated.
i
After the oil drain is completed, the following
screen is displayed.
|
1 689 988 238
2012-11-06
i
The recovery phase continues till the absolute
pressure is 600 mbar. When the recovery is com-
pleted, other service phases are executed auto-
matically.
After the filling phase is completed, the "Hose
Drain" screen is displayed.
i
If any error occurs during recovery, vacuuming or oil/
UV dye recharge phases, the automatic mode will not
proceed to the filling phase and the "Hose Drain"
screen will not be displayed.
Caution - Risk of frostbite!
If refrigerant escapes, there is a risk of
frostbite to the hands and body.
¶
Carefully disconnect filling hoses as all
hoses can contain pressurized refrigerant.
i
See chapter 6.5.1 and execute steps 21 to 25 to
complete the service.
Robert Bosch GmbH
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
