Table of Contents
Advertisement
Available languages
Available languages
Intended use
This product is a hand-operated electric tool for polishing metals and painted surfaces.
Apply the polish evenly on the polishing disc. Do not apply the polish directly to the surface you wish to
polish.
The user of the device must ensure he/she is wearing sufficient safety gear during use in accordance with
this user manual and the warning symbols on the device itself. Before use and during use where necessary,
check the device and the disk for electrical and/or mechanical damage.
If you discover any damage to the device, cease operation immediately and contact a professional
workshop.
Unintended use
All use of the device not described under "Intended use" is considered unintended use.
The device may not be used as follows:
-
Professing materials other than those listed under intended use,
-
Sanding with sanding disc,
-
Supplying drive for other devices
Risk of injury.
The user is liable for all damage to persons and property that occur due to improper or unintended use.
The manufacturer considers the warranty service void in case of use of alternative or non-original
components.
Residual risks
Even where the device is used properly, a certain residual risk cannot be precluded. Due to its equipment
type and construction, the device poses the following potential risks:
-
Contact with the unprotected polishing surface (skin abrasion/cuts)
-
Ejection of parts of the polishing surface (cuts or blunt injury)
-
Ejection of parts of the processed material (cuts or blunt injury)
-
Contact with sharp corners of the processed surface (cuts)
-
Damage to hearing where no appropriate hearing protection is worn (hearing loss)
-
Electric shock in case of contact with non-insulated electrical components.
Other residual risk may occur in case of improper use if the instructions included in this user manual are not
followed.
2
Advertisement
Table of Contents
