The Restart/Reset Mode
You can set the synchronization externally with a VD pulse
as a reference signal. Set the synchronization as follows:
1
Set the SHUTTER switch at the rear of the unit to R.R.
2
Set the SIGNAL switch at the rear of the unit to 2I.
Note
External synchronization can only be set when the SIGNAL
switch is in the 2I position.
Trigger pulse
HD pulse
VD pulse (1)
VD pulses (2)
VD pulses (3)
VD pulses (4)
A
A
Restart/reset timing chart
3
Set the VD pulse with the S4 switch on the SG-235
board.
For details on how to set the VD pulse, see "Location and Setting of the
Internal Switches on the SG-235 Board" on page 87.
A
For long exposure
For 1-field output of field
accumulation/image
For frame output of field
accumulation/image
1-frame output of field
accumulation/image
A = 525/2H
81