Table of Contents
Advertisement
Lenovo Moto Z4
Level 2 – Service and Repair Manual
Battery Removal
/// WARNING ///
Failure to adhere to Safety Critical Note(s) may
increase risk of rupture, burning, or failure to
function safely when used by the customer.
Refer to the Battery Safety Guidelines.
NOTE
After you remove the Battery, you
cannot reuse it.
1.
Use the Tweezers to remove the Kapton
Tape securing the Battery BtB Connector to
the Main PCB.
2.
Set the Hot Plate to 80 °C (176 °F).
// CAUTION //
Do not set the Hot Plate temperature higher than
80 °C (176 °F). Damage to the phone may
occur.
NOTE
Preheating with an oven is also acceptable if the
oven is set to the same temperature.
PAGE 70
// CAUTION //
Handle the Battery Pack with care. If dropped to the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
- Quick Links:
- Exploded Views
Hide quick links:
Advertisement
Table of Contents
