Lenovo Moto Z4
Level 2 – Service and Repair Manual
Coax Cable Assembly
Description
Ain OPC
Stingray FRU MB NA VZW 4+128G SS
Stingray RearCVR FLSHGRY Etching NA
Stingray RearCVR FLSHGRY Etching VZW
Stingray RearCVR WHT Etching VZW
Stingray FRU RearCVR FLSHGRY
Stingray FRU RearCVR WHITE
CBL,COAX,500mohm,STINGRAY,FOLES_Sub Coax
1.
Use rolling pressure to connect the Coax
Cable to the first Coax Cable BtB
Connector on the Main PCB.
2.
Use the flat end of the Blackstick to press
the Coax Cable into the recess in the
Front Housing as shown.
3.
Use the Tweezers to remove the Coax
Cable Mylar from the carrier.
4.
Use the end of the Blackstick to press the
Cable Mylar Cable to the recess in the
Front Housing as shown.
5.
PAGE 134
Reference #
3
5
21
Lenovo Confidential Restricted:
Do not share without consent from Lenovo