Table of Contents
Advertisement
m
. Error codes 01 through 14 are detected in both/one of the SS-83 and/or MS-58 boards.
Error codes 20 through 23 are detected in the MS-58 board.
Error codes 92 through 99 are detected in the SS-83 board.
. There are two error groups of error codes: VTR and OTHERS. If errors occur in multiple error groups,
the error message of each group are switched at two-second intervals.
Also, if multiple errors occur in error group, the priority level of each group display are as follows:
VTR:
97, 02, 03, 04, 05, 07, 06, 01, 09, 08, 0A, 10, 11, 12, 13, 14, 20, 21, 22, 23
OTHERS: 92, 96, 98, 99, 93, 95
3-2. Details of Error Messages
c
The "protection mode" described in this section means the servo control system automatically stops the
tape transport and drum motor rotation, and maintains this state. The DNW cannot be automatically
recovered to the normal state when the DNW once enters the protection mode. Be sure to turn on the
power again under the absence of the cassette tape.
If the protection mode is entered with the cassette tape inserted, take out the cassette tape manually with
reference to "2-12. Taking Out the Cassette in Tape Slacking". Never turn on the power again without
taking out the cassette tape. This may damage the tape.
n
The messages on the time data display area differ from the messages which are superimposed on the
video monitor in some items. In this section, each message indicates as following example.
Ex. : ERROR-23 THREADING RING POSITION ERROR
(THRED RING SENS)
Message on time data display area
DNW-A75/A75P
Message superimposed on video monitor
3-1. Overview of Error Message
3-2. Details of Error Messages
3-3
- Quick Links:
- Overview of Error Message
- Error Message
Hide quick links:
Advertisement
Table of Contents
