Sharp LC-60LE660U Service Manual page 34
Lcd color television
Hide thumbs
Also See for LC-60LE660U:
- Operation manual (130 pages) ,
- Operation manual (129 pages) ,
- Setup manual (36 pages)
Table of Contents
Advertisement
LC-60/70LE660U,C6600U
10. Key writing
10.1. MAC key writing (MAIN PWB: QPWBXG460WJ**)
10.2. Netflix, PlayReady key writing (MAIN PWB: QPWBXG460WJ**)
10.3. WideVine key writing (MAIN PWB: QPWBXG460WJ**)
10.4. Update Logic Serial No. writing (MAIN PWB: QPWBXG460WJ**)
10.5. HDCP1.4 key writing (MAIN PWB: QPWBXG460WJ**)
11. Factory setting
After completing the factory setting, pull out the AC cord to complete the setting.
CAUTION: Do not turn on the power after completing the factory setting. If the power is turned on, configure the factory setting again.
Adjustment point
Adjustment conditions
1
Factory setting
Complete the setting by
pulling out the AC cord.
12. Software version
1. Main microprocessor
BUFF_C_104.img
2. T-CON ROM
APRICOT_****************.ROM
•
Point the cursor to [INDUSTRY INIT (+Cause)], set to "ON" using [+]/[-] of the [VOL]
key, and press the [ENT] key.
The version confirmation screen appears on the green screen. It is completed when
[SUCCESS] is displayed at the top.
(If error occurs, [ERROR] is displayed on the red screen.)
•
Turn off the AC power.
The following items are initialized when configuring the factory setting.
1) User set value
2) Channel data (broadcasting frequency, etc.)
3) Operating time
4) Password setting value
5) V-CHIP block setting value
5 – 11
Adjustment procedure
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
