Table of Contents
Advertisement
B.5.3k
Reading an Optional Card EEPROM
To read the data of the EEPROM for an optional card:
1. From the left pane of the Calibration/Test window, double-click on Hardware Test.
2. In the center pane, double-click on READ OPCARD EEPROM.
3. Double-click on the Slot (1 or 2) that holds the optional card.
4. The right pane lists the Header Information. When you have reviewed this data, click [Next Item].
5. The right pane now shows Calibration Values. When you have reviewed this data, click [Next Item].
6. The right pane now shows RTD Calibration Values.When you have reviewed this data, click [Next Item] or [Exit
Page] to return to the Hardware Test option.
B.5.3l
Setting the Number of Channels
To set the number of XGM868i channels for display:
1. From the left pane of the Calibration/Test window, double-click on Hardware Test.
2. In the center pane, double-click on Set #Chans.
3. In the Number of Channels window, double-click on 1 or 2 Channels. PanaView returns to the Hardware Test
option. Click [Exit Page] to return to the main Calibration/Test menu, and [Close] to exit the Calibration/Test menu.
B.5.3m Initializing the XGM868i to Default Values
To restore the XGM868i to its original default values:
1. From the left pane of the Calibration/Test window, double-click on Hardware Test.
2. In the center pane, double-click on Initialize Meter.
3. The right pane displays a Warning that all application parameters must be reentered after initialization. Click [Next
Item] to continue, or [Exit Page] to return to the Hardware Test option.
4. In the center pane, double-click on Yes to Reset Meter, or on No to leave the XGM868i in its current state. If you
select Yes, the XGM868i returns to its default settings, and PanaView exits the Calibration/Test menu.
DigitalFlow™ XGM868i Service Manual
Appendix B. Calibration and Testing with PanaView
59
Hide quick links:
Advertisement
Table of Contents
