Line Modules
5.1
Introduction
The drive line-up is connected to the power supply network via the Line Modules.
Line Infeeds comprise a Line Module and the associated line connection. They generate a
DC voltage from the connected line voltage that is used to supply the connected Motor
Modules.
Line Modules and Interface Modules are suitable for direct operation on TN, IT and TT
systems.
General characteristics of the Line Modules
● Supply voltage:
– 3 AC 380 V –10% (-15% < 1 min) to 3 AC 480 V +10% (47 to 63 Hz)
– 3 AC 500 V –10% (-15% < 1 min) to 3 AC 690 V +10% (47 to 63 Hz)
● Suitable for TN, TT, and IT supply systems
● Operating status and error status via LEDs
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7
5
135