GE Vivid T8 Basic Service Manual page 130
Hide thumbs
Also See for Vivid T8:
- Basic service manual (329 pages) ,
- Technical publication (127 pages) ,
- Material safety data sheet (2 pages)
Table of Contents
Advertisement
System Setup
3-9-4-2 Verify the Network Connection to a Device
NOTE:
3-50
Follow the steps below to do a First Test (TCP-IP Ping) of the
network connection:
1. Highlight the device to be verified and select Properties.
Figure 3-35. DICOM Server Properties dialog
2. Select the "Check" button to Ping the server.
By selecting the "Check" button, a ping is sent to the remote
server to see if it is accessible via the network. It is not a
DICOM Echo (DICOM ping), so it does not check AE title or
port number.
3. If the network connection to the server is OK, it will be
illustrated by the "Pass" sign, a white check mark on a green
background
The "Fail" sign
failing.
Typical causes:
•
Network cable not connected
•
Configuration error(s)
.
indicates that the network connection is
Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3
Advertisement
Table of Contents
Troubleshooting
