Table of Contents
Advertisement
CPU Cache
This parameter enables or disables the first-level or internal memory.
The default setting is
System BIOS Cacheable
Set this parameter to
directly from the cache memory, thus allowing your system to function
faster. Set this to
default is
Enabled.
Video BIOS Cacheable
Set this parameter to
directly from the cache memory, thus allowing your system to function
faster. Set this to
default is
Enabled.
Memory at 15MB-16MB Reserved for
To prevent memory address conflicts between the system and
expansion boards, reserve this memory range for the use of either the
system or an expansion board.
Memory Parity Mode
This parameter allows you to select the DRAM operating mode.
Setting to
turns on the error check and correct (ECC) function.
ECC
ECC automatically corrects any single-bit errors detected.
multiple-bit errors detected, ECC only issues an NMI to signal the
operating system of the multiple-bit error detection.
deactivates the function.
Disabled
4.7.4
Non-PnP ISA Device Configuration
The Non-PnP ISA Device Configuration parameters allow you to
specify the settings for cards without the plug-and-play (PnP) feature.
BIOS Utility
Enabled.
if you want the system BIOS to run
Enabled
to run the system BIOS from RAM. The
Disabled
if you want the video BIOS to run
Enabled
to run the video BIOS from RAM. The
Disabled
For
Setting to
4-33
Advertisement
Chapters
Table of Contents
