4.6.2
Silent Boot
This parameter enables or disables the Silent Boot function. When
set to
, BIOS is in graphical mode and displays only an
Enabled
identification logo during POST and while booting. After which the
screen displays the operating system prompt (such as DOS) or logo
(such as Windows 95). If any error occurs while booting, the system
automatically switches to the text mode.
Even if your setting is
while booting by pressing
activation of the keyboard.
When set to
Disabled
you see the system initialization details on the screen.
4.6.3
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon
booting. The default setting is
4.6.4
Memory Test
When set to
Enabled
RAM test during the POST routine.
system detects only the memory size and bypasses the test routine.
The default setting is
4.6.5
Initialize SCSI Before IDE
Enabling this parameter allows SCSI devices installed in the system
to be initialized before IDE devices. You may enable this parameter
if you have a SCSI boot drive. When this parameter is disabled, the
IDE drives are normally initialized first during POST.
BIOS Utility
, you may also switch to the text mode
Enabled
after you hear a beep that indicates the
, BIOS is in the conventional text mode where
Enabled
, this parameter allows the system to perform a
.
Disabled
.
When set to
Disabled
, the
4-19