Advertisement
Start point: Turn the TV set on and select the
video programme number (described on page 11).
Controls
VCR's Display
1
Insert a cassette.
FT
pe
Note: When a cassette withits safety tab snapped
PE Lieu |
off is loaded, playback starts automatically.
22
Press the PLAY button on the remote control unit
| or PLAY/STILL button on the VCR.
The "vcr " indicator must belit for viewing video
via the Scart connector lead.
If not, press the VCR/TV button on the handset so
thatit lights.
Note: When you press the PLAY button and a
cassette has not been inserted, the "FFE *will
flash in the VCR display to warn you.
TRACKING A/V
PLAY
PAUSE
SLOW
REW
During playback you can use the following
features.
Still playback
Press the PAUSE button on the remote control
unit or PLAY/STILL button on the VCRto stop the
picture on the screen during playback.
Press the button again to reset to normal
playback.
if the screen "jitters" vertically, this can be
improved by pressing the TRACKING A / V
button.
F.ADV
Frame advance
Press the F. ADV button to advancethe picture to
the next frame during still play-back.
Pressing and holding the F. ADV button advances
the frames continuously.
Slow function
Press the SLOW button during playback.
Press the SLOW button on the remote control unit
during playback to view slow playback picture.
Note: When the slow playback mode continues for
about 1 minute, the VCR switches to stop mode
automatically to prevent damage to the tape.
Advertisement
