Table of Contents
Advertisement
1.3 System Software Specifications
1.3.1 System overview
To use the FL.NET module, you must register various items of module information in the
module. This can be accomplished by using the system software (tools) listed below. The
operating procedures for these tools are similar to those for general Windows® applications.
Package name
FL.NET system
1.3.2 Required hardware and software
The following hardware and software items are required for the use of the FL.NET module
system software:
• Personal computer (main unit) containing a Pentium 300 MHz or faster CPU, or a 1 GHz or
faster CPU (when Windows® 7 (32-bit version) is used)
• Display having a resolution of 800 × 600 dots (SVGA) or higher
• Microsoft® Windows® 2000 operating system, Microsoft® Windows® XP operating system or
Microsoft® Windows® 7 (32-bit) operating system
• At least 64 MB of RAM (when Windows® 2000 is used)
• At least 128 MB of RAM (when Windows® XP is used)
• At least 1 GB of RAM (when Windows® 7 (32-bit) is used)
• At least 10 MB of free hard disk space
• Cable for connecting the personal computer to the LPU unit (RS-232C cross cable with D-sub
9-pin connectors) or cable for connecting the personal computer to the CMU or ET.NET
module (10BASE-T or 100BASE-T twisted pair cross cable with RJ-45 modular connectors)
Users of this product must have an adequate knowledge of the Windows®
environment and user interface. This system conforms to the Windows®
standard, and this manual is prepared for those users who are familiar with the
basic Windows® operating procedures.
Table 1-1 Types of System Software (Tools)
Model (For S10V)
S-7895-30
NOTICE
Version
01-03 or later
1-5
1 OVERVIEW
Supply style
Option
Advertisement
Table of Contents
Troubleshooting
