Table of Contents
Advertisement
3.2.1 GT Car
Bosch Motorsport
3 Installation
Mount the LTE65 transmitter device in the vehicle in a place that will remain relatively dry
and away from direct heat sources. The receiver device should be placed on the pit stand
in free air.
Tapped mounting holes are provided on the LTE65 transmitter device if you wish to hard-
mount the device in your vehicle. Please see the offer drawing in Appendix A for hole
thread size, depth, and placement.
Metal, carbon fiber panels, and heated windscreens negatively affect antenna perform-
ance.
3.1 Power Supply and Voltage
Min. Supply Voltage
Max. Supply Voltage
Internal Power Backup
Power Consumption
3.2 Car Specific Antennas
The GT car antenna available from Bosch Motorsport is a dual 4G MIMO antenna with 3G
fallback, both MIMO antennas are in the same housing.
Recommended torque spec for the antenna connection: 4 in-lbs (0.45 Nm)
Suggested installation locations shown in in the figure below.
Preferred Locations:
Secondary Locations:
Telemetry_System_LTE65_Manual
8 V DC
18 V DC
24 V operation possible on agreement
with customer
30+ seconds
6 W
Installation | 3
7 / 28
- Quick Links:
- Led Status Lights
Hide quick links:
Advertisement
Table of Contents
