GT21
Depending on the units and cables used for the GOT, the distance more than the described dimensions may be required.
Install the GOT with consideration of the connector dimensions and the cable bend radius.
For the vertical installation, install the GOT so that the power supply terminal, which is located on the GOT rear face, is at the
lower side.
When installing GT2107-W vertically, make sure that the power supply terminal on the GOT rear face is at the upper side.
Page 140 GT21
Horizontal
C
Vertical (except GT2107-W)
A
6 INSTALLATION AND REMOVAL
192
6.4 Installation Position
B
D
A
B
D
Panel thickness: 1 mm to 4 mm (0.04 to 0.16 inch)
E
Panel thickness: 1 mm to 4 mm (0.06 to 0.16 inch)
E