Track Job; Free Eg Base Position - Yamaha AN1x Owner's Manual
Control synthesizer analog physical modeling
Hide thumbs
Also See for AN1x:
- Data list (21 pages) ,
- Service manual (46 pages) ,
- Owner's manual (123 pages)
Table of Contents
Advertisement
Track No
(Track Number)
The Track Number parameter lets you select the Free
EG track.
Settings: Trk1 ~ Trk4
The selected track will record knob movement data when Free EG recording is
initiated. When the [EDIT ROTARY] switch is set to the VOICE FREE EG menu, an
empty track will automatically be selected.
Param
(Parameter)
The Parameter setting determines which knob
parameter will be played by the data in the selected
Free EG track.
Settings:
Only one parameter can be selected for a track.
For information about available parameters, see the separate Data List book.
SceneSw
(Scene Switch)
The Scene Switch setting determines which Scene will
be played by the selected Free EG track.
Settings: off, Scene1, Scene2, both (Scenes 1 and 2)
Track Job
Track Job parameters let you record a selected Free EG
track, perform track copy operations and undo/redo a
Free EG recording or copy operation. There are three
parameters, including Rec (Record), Copy and Undo.
Rec
(Record)
The Record parameter lets you determine how a Free
EG record operation (of knob movement data) will be
executed.
After recording a track, the next highest numbered track will automatically be
selected for recording.
Settings:
REC OFF: Free EG is not recording.
REC STBY Trk: Standby situation for the selected track. The
Free EG is ready to record based on the Trigger setting.
REC STBY All: Standby situation for recording on all four
tracks at the same time (a different parameter for each). The
Free EG is ready to record based on the Trigger setting.
Free EG Base Position
Knob positions are recorded in a Free EG track as increases
(positive values) and decreases (negative values) to the
"base" position of the knob, or the position at which the
knob is located when you first move it. After Free EG
recording, if you change the knob parameter, you also
change the base position accordingly. For example, if the
knob base position is set too high, the Free EG data changes
may occur out of the range of the assigned track parameter.
Therefore, take care not to set the knob base position too
high.
Copy
The Copy function lets you copy the Free EG data
(knob movements) of another track in the current voice
to the currently selected track, or copy the data of any
track in any voice to the currently selected track of the
current voice.
Settings: Trk 1 ~ Trk 4; (Voice) 1 ~ 128 Trk 1 ~ Trk 4
83
- Quick Links:
- About MIDI
Hide quick links:
Advertisement
Table of Contents
