Yamaha 02R96 Owner's Manual page 94
Yamaha digital mixing console owner's manual
Hide thumbs
Also See for 02R96:
- Owner's manual (349 pages) ,
- Supplementary manual (8 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
To turn Aux Sends on and off, select the rotary controls, and press [ENTER].
4
The rotary controls of Aux Sends that are turned off, appear gray, and "OFF" appears in
place of the level value. Aux Send levels can still be changed even when they're off.
To set Aux Send levels, select the rotary controls, and use the Parameter
5
wheel or INC/DEC buttons.
To set the Pre/Post parameters, select the PRE/POST buttons, and use the
6
[ENTER] button or INC/DEC buttons.
To set all Input Channels for the selected Aux Send to pre-fader or post-fader
7
simultaneously, select the GLOBAL PRE or POST button, and then press
[ENTER].
The PRE or POST button appears highlighted, and remains highlighted until the Pre/Post
setting of one or more channels is changed, so you can quickly see if all Input Channels are
set to either pre-fader or post-fader.
Fixed Mode
See page 79 for information on how to select Fixed Aux mode.
Use the AUX SELECT [DISPLAY] button to select the Aux Send pages.
1
The Input Channel 1–24 Aux Send page in Fixed mode is shown below. The layout of the
other two Aux Send pages in Fixed mode is the same.
Use the AUX SELECT [1–8] buttons to select Aux Sends 1–8.
2
3
Use the cursor buttons or Parameter wheel to select the Aux Send buttons.
Input Channels can also be selected by using the LAYER buttons and [SEL] buttons.
4
Use the [ENTER] button or INC/DEC buttons to turn Aux Sends on and off.
If the Fader mode is set to Aux, the faders provide a visual indication of the On/Off status
of each Input Channel for the currently selected Aux Send. For Aux Sends that are on, faders
move to the nominal position. Aux Sends that are off, they move to the – position. On/Off
settings cannot be changed by using the faders.
81
Aux Send Pages
02R96—Owner's Manual
Advertisement
Table of Contents
