Table of Contents
Advertisement
HUAWEI USG6000&USG9500
Upgrade Guide
----End
1.6.2 Setting Up an Environment for Upgrading System Software
Using Web
Prerequisites
Before you log in to the USG6000 using the console port, complete the following tasks:
l
l
l
Context
When the system software needs to be upgraded remotely, but the Web environment is not
configured, you can log in to the USG6000 through the console port and then configure the
Web environment. Then you can log in to the USG6000 remotely using Web to upgrade the
system software.
This section describes how to establish the HTTP-based upgrade environment through the
console port.
Figure 1 shows the connection for configuring the upgrade environment using the console
port. The serial port of the PC is connected to the console port of the USG6000 with a
standard a serial cable.
The device has two types of console ports: RJ45 and mini USB console ports. If an RJ45
console port is used, use the console cable delivered with the USG6000. Using the cables of
other vendors might cause unexpected faults. If a mini USB console port is used, purchase the
mini USB-to-USB cable as required. The RJ45 and mini USB console ports cannot be used
together. If both ports are connected, only the mini USB console port is available.
Figure 1-51 Upgrade topology through the console port
Issue 01 (2018-01-16)
[FW] ssh user user1 authentication-type password
[FW] ssh user user1 service-type stelnet
[FW] ssh server port 1025
[FW] ssh server timeout 80
[FW] ssh server authentication-retries 4
[FW] ssh server rekey-interval 1
[FW] ssh server compatible-ssh1x enable
Prepare a PC (with an RS232 serial port) and a serial cable.
Install an emulation program, such as HyperTerminal on the Windows XP, on the PC.
Power on the USG6000 and ensure that the USG6000 runs properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
92
Hide quick links:
Advertisement
Table of Contents
