Operation Via Pc - Siemens SIMATIC HMI KTP400 Manual
House control with weather sensors
Hide thumbs
Also See for SIMATIC HMI KTP400:
- Operating instructions manual (132 pages) ,
- Quick start manual (2 pages) ,
- Quick install manual (2 pages)
Table of Contents
Advertisement
5 Operation
5.3
Operation via PC
Note
When using the application example with your PC, please make sure the
KTP400 or KTP700 is not connected with the other modules of the application
example (LOGO! modules, PC, etc.). It is recommended not to connect the Basic
Panel, if you already use your PC as a Basic Panel with the WinCC simulation.
For operating the application example with the PC, the same basic settings
the WinCC project apply as for direct operation with the Basic Panel. The only difference is that
you do not press the "Load" button, but the "Start simulation" button.
Table 5-2
No.
Action/response
1.
In the project tree, select the folder
"KTP400[KTP400 Basic PN]" and click on
"Start simulation" in the toolbar.
Press "OK" in the displayed message to
2.
start the runtime simulator.
3.
Then, the runtime simulator starts with the
project.
4.
You can now operate the application
example via your PC with your mouse.
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346,
V2.1,
09/2018
(chapter
4.3.1) in
WinCC
34
Hide quick links:
Advertisement
Table of Contents
