ABB ACS560 Quick Installation And Start-Up Manual page 161
General purpose drives standard control program
Hide thumbs
Also See for ACS560:
- Firmware manual (514 pages) ,
- Quick installation and start-up manual (306 pages) ,
- Hardware manual (240 pages)
Table of Contents
Advertisement
Motor cable
Motor cable
2. Prepare the ends of the cable as illustrated in the figure. Two different motor cable
types are shown in the figures (2a.and 2b).
2. Prepare the ends of the cable as illustrated in the figure. Two different motor cable
types are shown in the figures (2a.and 2b).
Note: The bare shield will be grounded 360 degrees.
Note: The bare shield will be grounded 360 degrees.
2a
2a
PE
PE
2
b
2
b
PE
PE
3. मोटर के ब ल को निम् न ु स ार कने क ् ट करे ं :
3. Connect the motor cable as follows:
•
Ground the shield 360° by tightening the clamp of the power cable grounding shelf
•
Ground the shield 360 degrees by tightening the clamp of the power cable
onto the stripped part of the cable (3a).
grounding shelf onto the stripped part of the cable (3a).
•
Connect the twisted shield of the cable to the grounding terminal (3b).
•
के ब ल की मु ड ़ ी शील् ड को ग् र ाउं ड िं ग टर् म िनल (3b) से कने क ् ट करे ं ।
•
Connect the phase conductors of the cable to the terminals of T1/U, T2/V and
•
के ब ल के फे ज ़ कं ड क् ट रों को T1/U, T2/V और T3/W के टर् म िनलों से कने क ् ट करे ं ।
T3/W.
3c
3a
3b
•
Tighten the screws to the torque given below.
•
Frame size
पे ं च ों को नीचे दिए गए टॉर् क पर कसे ं ।
T1/U. T2/V. T3/W
फ् र े म आकार
Input power cable
4. Prepare the ends of the cable as illustrated in the figure.
T1/U. T2/V. T3/W
Note: The bare shield will be grounded 360 degrees. Mark the pigtail made from
the shield as a PE conductor with yellow-and-green color.
इनपु ट पावर के ब ल
PE
4. चित् र मे ं दिखाए अनु स ार के ब ल के सिरों को तै य ार करे ं ।
PE
टिप् प णी
[ Translation missing]
pigtail made from the shield as a PE conductor with yellow-and-green color
HI -त् व रित इं स ् ट ाले श न और स् ट ार् ट -अप गाइड 161
R0...R1
R2
N·m
lbf·ft
N·m
0.5...0.6
0.4
1.2...1.5 0.9...1.1
R0...R1
N·m
0.5...0.6
The bare shield will be grounded 360°. Mark the
Electrical installation 79
lbf·ft
lbf·ft
N·m
0.4
1.2...1.5
EN
HI
R2
lbf·ft
0.9...1.1
Hide quick links:
Advertisement
Table of Contents
