Toshiba NV Series Hardware Manual page 111
Unified controller
Hide thumbs
Also See for NV Series:
- Instruction manual (148 pages) ,
- User manual (70 pages) ,
- Operating instructions (functional manual) (49 pages)
Table of Contents
Advertisement
Chapter 3 Installation and Wiring
(4) Remove the top bracket.
(5) Remove the screw at the top of the module.
(6) Hold the bottom of the module by one hand, and press the top lock lever by the other
(7) While pressing down the top lock lever, pull the module straight from the slot by the hand
92
6F8C1497
After loosening four screws securing the top bracket, move the top bracket to the left,
and pull it from the body of BUM7B. Check that four screws securing the top bracket
align with the large diameter circle of keyhole-shaped screw holes.
Small diameter hole
Before moving the top bracket
Screw securing the top bracket
Move the top bracket to the left
After moving the top bracket to the left
hand.
holding the bottom of the module.
Large diameter hole
Top bracket mounting hole
(keyhole type)
Top bracket mounting hole (keyhole type) x 4
The screw aligns with the large diameter hole.
Top bracket mounting hole (keyhole type) x 4
- Quick Links:
- Overview
- Controller Module
- Cpu Module
Hide quick links:
Advertisement
Chapters
Table of Contents
