Sony DVP-NS300 Operating Instructions Manual page 59
Hide thumbs
Also See for DVP-NS300:
- Service manual (111 pages) ,
- Operating instructions manual (76 pages) ,
- Training manual (46 pages)
Table of Contents
Advertisement
Normally, select this position
Makes the low sounds clear
even if you turn the volume
down It is especially
recommended when you listen
to the sound using the speakers
of the TV
Gives you the feeling of being at
a live performance When you
use high quality speakers, it is
even mo*e effective
WDOWNMIX
(DVD only)
Switches the mixing down methods when
you play a DVD on which rear signal
components such as LS, RS, or S are
recorded in Dolby Digital format FOI details
on the rear signal components, see
"Changing
the
Sound"
(page 42) This
function affects the output of the following
jacks
- LINE OUT L/R (AUDIO)
l/2 jacks
-- DIGITAL
OUT (OPTICAL
and
COAXIAL)
jacks when "DOLBY
DIGITAL"
is set to "D-PCM"
in
"DIGITAL
OUT" (page 59)
I VORMAL
Select this when the player is
connected to an audio component
that does not conform to Dolby
Surround (Pro Logic) All of the
output signals are downmixed to 2
channels without the Dolby
Surround (Pro Logic) effect
IOLBY
WR-
3OUND
Select this when the player is
connected to an audio component
that conforms to Dolby Surround
(Pro Logic) The output signals
which reproduce the Dolby
Surround effect are downmixed to
2 channels
n DIGITAL
OUT
Selects if audio signals are output via the
DIGITAL
OUT (OPTICAL
and COAXIAL)
jacks
OFF
L
Normally, select this position When
you select "ON," set "DOLBY
DIGITAL," and "DTS " For details on
setting these items, see "Setting the
digital output signal "
The player does not output the audio
signals via the DIGITAL OUT
(OPTICAL and COAXIAL) jacks The
influence of the digital circuit upon the
analog circuit is minimal
Switches the method of outputting audio
signals when you connect the following
component using a digital cord via the
DIGITAL
OUT (OPTICAL
or COAXIAL)
jacks
- Amplifier
(receiver) with digital input
jack
- Amplifier
(receiver) with a built-in DTS,
or DOLBY
DIGITAL
decoder
-.
- MD or DAT deck
For connection details, see page 19
<
Select "DOLBY
DIGITAL,"
and "DTS"
$
after setting "DIGITAL
OUT" to "ON "
P
n DOLBY
DIGITAL
Selects the Dolby Digital signals output via
the DIGITAL
OUT (OPTICAL
and
COAXIAL)
jacks
continued-
59
Advertisement
Table of Contents
