Motor Modules Booksize Compact as expansion axes
6.5 Meaning of the LEDs on the Motor Module Booksize Compact
6.5
Meaning of the LEDs on the Motor Module Booksize Compact
Table 6- 5
Meaning of the LEDs on the Single Motor Module/Double Motor Module
Status
RDY
DC LINK
Off
Off
Green
--
Orange
Red
Orange
Orange
Red
--
Green / Red
--
(0.5 Hz)
Green / Red
--
(2 Hz)
Green /
--
Orange
or
Red / Orange
Electric shock due to applied DC-link voltage
Irrespective of the state of the LED "DC LINK", hazardous DC-link voltages can always be
present.
Contact with live parts can result in death or serious injury.
• Observe the warning information on the component.
140
The electronics power supply is missing or outside the
permissible tolerance range.
The component is ready for operation. Cyclic DRIVE-
CLiQ communication is taking place.
The component is ready for operation. Cyclic DRIVE-
CLiQ communication is taking place.
The DC-link voltage is present.
The component is ready for operation. Cyclic DRIVE-
CLiQ communication is taking place.
The DC-link voltage is too high.
DRIVE-CLiQ communication is being established.
This component has at least one fault.
Remark:
The LED is activated irrespective of whether the corre-
sponding messages have been reconfigured.
Firmware is being downloaded.
Firmware download is complete. Wait for POWER ON.
Component recognition via LED is activated. This func-
tion can be parameterized (see SINAMICS S120/S150
List Manual)
Comment:
Both possibilities depend on the status of the LED when
activating.
WARNING
Description, cause
Remedy
–
–
–
Check the line supply volt-
age.
–
Remedy and acknowledge
fault
–
Carry out a POWER ON
–
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7