Figure 52.
Fixing Unit Bracket (2)
Fixing Pole Type
The standard of the pole on which the mounting bracket can be attached using
steel bands is 50 A to 150 A.(250 A is optional)
Fixing Mounting Bracket for 1 sector
To fix the mounting bracket on the pole, do the following:
Prerequisites
Before proceeding with fixing the mounting bracket for 1-sector wall type, make
sure that you have the items mentioned in the table below:
Table 16.
Parts and Tools for Fixing Mounting Bracket on the Pole
Category
Parts
Recommended Torque Value
Working Tools
1
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
Description
Mounting Bracket
Fasteners
Steel Band
Steel Band Fixing Screw
Torque Driver (20 to 90 lbfin)
Screw Driver Bit ('+', No. 3)
Compass
Pass the steel band through the fixing hole of the mounting bracket.
Chapter 2 Installing System
2
Unit Bracket
M6 Hex. Bolt
(Washer Assembly)
Confidential
1 EA
2 EA
48.5 lbfin (56.1 kgfcm)
53