Table of Contents
Advertisement
Figure 15.
Fixing Unit Bracket (3)
Fixing Pole Type
This section describes the procedures for fixing the system on the pole.
The standard of the pole on which the mounting bracket can be attached using
steel bands is 50 A to 150 A (250 A is optional).
Assembling Mounting Bracket for 1 Sector
To assemble the mounting bracket for 1 sector, do the following:
Prerequisites
Before proceeding with assembling the mounting bracket for 1-sector, make sure
that you have the items mentioned in the table below:
Table 4.
Parts and Tools for Fixing Mounting Bracket on the Pole
Category
Parts
Recommended Torque Value
Working Tools
1
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
Description
Mounting Bracket
Fasteners
Steel Band
Steel Band Fixing Screw
Torque Driver (20 to 90 lbfin)
Screw Driver Bit ('+', No. 3)
Compass
Pass the steel band through the fixing hole of the mounting bracket.
Chapter 2 Installing System
2
Unit Bracket
M6 Hex. Bolt
(Washer Assembly)
Confidential
1 EA
2 EA
48.5 lbfin (56.1 kgfcm)
21
Hide quick links:
Advertisement
Table of Contents
