Measurement (Meawa, Meac) - Siemens SINUMERIK 840D sl Function Manual
Synchronized actions
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Program code
N20 ... DO CPLNUM[X,Y]=2 CPLON[Y]=X
Activate coupling, deactivation/activation with implicit resynchronization
Program code
N10 ... DO CPLON[X]=Y CPLNUM[X,Y]=3
N20 Y100 F100
N30 ... DO CPLOF=X CPLON[X]=Y CPLNUM[X,Y]=3
Activate coupling, deactivate and traverse as a command axis
Program code
N10 ... DO CPLON[X]=Y CPLNUM[X,Y]=3
N20 Y100 F100
N30 ... DO CPLOF=X MOV[X]=10
3.7.19
Measurement (MEAWA, MEAC)
The following commands can be used in synchronized actions for measurement:
● MEAWA (measurement without delete distance-to-go)
● MEAC (continuous measurement without delete distance-to-go)
While the measuring function in the part program is limited to one motion block, the measuring
function can be switched on and off any number of times from synchronized actions.
Note
Measurement can also be performed in JOG mode via static synchronized actions IDS ....
References
Detailed information on measuring commands can be found in:
● Coupled motion, curve tables, master value coupling:
Programming Manual, Job Planning; Section "Axis couplings"
● Generic coupling
Description of Functions, Special Functions, Section "Axis couplings (M3)" > "Generic
coupling"
Synchronized actions
Function Manual, 08/2018, 6FC5397-5BP40-6BA2
Detailed description
3.7 Actions in synchronized actions
; Error
109
Hide quick links:
Advertisement
Table of Contents
