Table of Contents
Advertisement
Available languages
Available languages
3.4.7
Connecting the CRI Piezo return flow module
1. Secure the connecting cables (fig. 11, item 1) to the
protective cover.
2. Secure the connecting cables (fig. 11, item 2) to the
mounting plate of the CRI Piezo return flow module.
Fig. 11:
Connecting the connecting cables (protective conductor)
3. Attach the connector (fig. 12, item 2) with seal
(fig. 12, item 1) to the valve on the CRI Piezo return
flow module.
4. Secure the connector (fig. 12, item 2) with the bolt
(fig. 12, item 3).
1
Fig. 12:
Connecting CRI Piezo return flow module
Robert Bosch GmbH
1
2
458885-07_Pal
2
3
458885-08_Pal
3.4.8
Securing protective cover
1. Fold the protective cover to the rear.
2. Secure the protective cover with Torx screws
M5 x 10.
Fig. 13:
Securing protective cover
3.4.9
Fitting housing covers
1. Secure the protective conductor to the left housing
cover (fig. 14).
2. Secure the housing cover with bolts (8x).
Fig. 14:
Securing left housing cover
| 1 687 010 393 | 21
en
M5 x 10
|
1 689 989 187
2016-12-20
Advertisement
Chapters
Table of Contents
