Fitting Cover; Attaching Connecting Cable 1 684 463 931 - Bosch 1 687 010 393 Original Instructions Manual

Extension set for piezo injectors

Table of Contents

Available languages

20 | 1 687 010 393 |

3.4.5

Fitting cover

1. Push the connecting cables (fig. 9, item 3 and 4)

through the openings in the cover (fig. 9, item 1).

2. Push the cable bushings (fig. 9, item 5) of the two

connecting cables (fig. 9, item 3 and 4) through the

openings in the cover.

3. Secure the connecting cable (fig. 9, item 7) to the

cover.

4. Push the connecting cable (fig. 9, item 8) into the

recess (fig. 9, item 6).

5. Fit the cover.

6. Fix the edge protection (fig. 9, item 2) over the met-

al edge of the recess (fig. 9, item 9).

3 4

458885-06_Pal

Fig. 9:

Fitting cover

7. Secure the side of the cover (fig. 9, item 1) to the

side frame with four countersunk bolts.

1 689 989 187

2016-12-20

3.4.6

Attaching connecting cable 1 684 463 931

Insert connecting cable 1 684 463 931 into connec-

tion X6 of the printed circuit board A2.

X 6

Fig. 10:

Attaching connecting cable 1 684 463 931

Robert Bosch GmbH

Table of Contents

Table of Contents