Table of Contents
Advertisement
1-7. Rack Mounting
5. Attach the rail brackets to the outer rails temporarily
using the screws (B 4x8) and plate nuts (large).
6. Attach the outer rails to the rack using the screws
(B 5x12), washers (ø5), spring washers (ø5) and plate
nuts (small).
7. Adjust the rail brackets to specified position, then
tighten the screws secured temporarily in the step 5.
The side installed
rack angle
Washer ø5
Plate nut
Spring washer ø5
(small)
B 5x12
+5
Spec. : 52
mm
_0
8. Install the DSM-T1 in the rack.
c
Be careful not to get caught your hand and finger in the
rack mount rail when installing the unit in the rack.
9. After installing the DSM-T1 in the rack, secure the
unit to the rack using the screws (RK 5x14) and
ornamental washers.
Rack
Ornamental washers
RK 5x14
Ornamental washers
RK 5x14
1-6 (E)
Rack
Plate nut (large)
Rail bracket
Outer rail
B 4x8
n
When the DSM-T1 is mounted in a rack, the maximum
traveling distance is illustrated below.
Inner rail
Rack
The maximum traveling
distance : 580 mm
Outer rail
Rail bracket
DSM-T1
Advertisement
Table of Contents
