Table of Contents
Advertisement
Play back a pre-recorded message from SD card
1.
Use the zone/message select buttons to select the broadcast area.
2.
Use the zone/message select buttons to select the message that you want to play back.
3.
Press the PTT button.
If specified, the Opening Chime is heard.
When the status indicator is lit red, the message plays.
When message playback is completed, PTT automatically turns off.
If specified, the Closing Chime is heard.
Use the scheduler to play back a pre-recorded message from SD card
By issuing a Paging event, the specified message is played back to the specified zone or zone group.
Using the Device Configuration Wizard to create your device setup
You will use MTX-MRX Editor's wizard to create your device setup before actually connecting your equipment.
After you've made basic settings, you'll be able to print information about the cabling and ID numbers.
Use the following procedure to make basic settings.
1.
Type a name for the MTX/MRX system you'll be constructing, and click [Next>].
Example 5) A system using the PGM1 for paging
MTX Setup Manual
125
- Quick Links:
- Input Settings
- Connecting the Equipment
Hide quick links:
Advertisement
Table of Contents
