Advertisement
Available languages
Available languages
Thorough cleaning
We advise you to clean the shaving heads thoroughly once a month
or when the appliance does not shave as well as it used to.
Note: The shaving heads are locked by a blue (Fig. 56) or an orange
(Fig. 57) retaining ring. Follow the correct instructions.
1 Switch off the appliance.
2 Pull the shaving head holder off the bottom part of the shaving
unit (Fig. 52).
3 Rinse the hair chamber and shaving head holder under the tap.
4 Turn the retaining ring anticlockwise and lift it off the shaving head
(Fig. 58).
Repeat this process for the other retaining rings. Place them aside
in a safe place.
5 Remove the shaving heads from the shaving head holder (Fig. 60).
Each shaving head consists of a cutter and guard.
Note: Do not clean more than one cutter and guard at a time, since
they are all matching sets. If you accidentally put a cutter in the
wrong shaving guard, it may take several weeks before optimal
shaving performance is restored.
6 Clean the cutter and guard under the tap (Fig. 61).
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head holder (Fig. 62).
Note: Make sure the notches on both sides of the shaving heads fit
exactly onto the projections in the shaving head holder.
10 Blue retaining ring: Place the retaining ring on the shaving head
and turn it clockwise to reattach the retaining ring.
Place the arrows on the ring in line with the projections in the
shaving head holder (Fig. 63). Turn the ring clockwise until it clicks
to indicate that the ring is fixed (Fig. 64).
- Orange retaining ring: Place the retaining ring on the shaving head
and turn it clockwise to reattach the retaining ring (Fig. 65). Repeat
this process for the other retaining rings.
19
English
Advertisement
