Table of Contents
Advertisement
Advanced Operation
Distinctive Ringing
Distinctive Ringing
➤ To set distinctive ringing (CTX software R1.2 or lower)
1. Press
2. Press a
3. Enter the ringing pitch number:
= Low,
4. Lift the handset to return to idle.
➤ To set distinctive ringing (CTX software R1.3 or higher)
1. Press
2. Press a
3. You can press
station calls within your system; external = outside line calls.)
4. Enter the two-digit pitch number (see table):
5. Press the same button that you pressed in Step 2 (
a confirmation tone and "DATA PROGRAMMED" displays on your LCD.
Table 4
Internal and External Call Ringing Tones
Tone No.
01
02
11
12
13
14
15
16
17
18
40
to enter User Programming Mode.
button. The Line LED is steady green.
= Middle,
to enter User Programming Mode.
or extension button. The LED is steady green.
to switch between internal and external pitch. (Internal =
Frequency and Cadence
500 Hz 1 sec. On, 3 sec. Off, repeat
1300 Hz 1 sec. On, 1 sec. Off, repeat
500/640 Hz 1 sec. On, 3 sec. Off, repeat
500/640 Hz 1 sec. On, 1 sec. Off, repeat
860/1180 Hz 1 sec. On, 3 sec. Off, repeat
860/1180 Hz 1 sec. On, 1 sec. Off, repeat
1300/1780 Hz 1 sec. On, 3 sec. Off, repeat
1300/1780 Hz 1 sec. On, 1 sec. Off, repeat
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 3 sec. Off, repeat
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1 sec. Off, repeat
= High,
= Combination
or extension). Two beeps is
Strata CTX DKT/IPT Telephone
10/03
- Quick Links:
- User Guide
- Message Waiting
- Volume Control
Hide quick links:
Advertisement
Table of Contents
